Maintaining your vehicle’s drivetrain is one of the most crucial yet often overlooked aspects of ensuring peak performance, especially in vehicles equipped with sophisticated all-wheel-drive (AWD) systems. In particular, Honda and Acura models utilize a unique component known as the Dual Pump System (DPS) to seamlessly distribute power between the front and rear wheels when additional traction is needed. This system plays a pivotal role in vehicle stability and control, especially under slippery or challenging driving conditions.
Over time, however, the DPS fluid inside this system begins to break down due to heat, pressure, and contaminants from regular use. When this fluid deteriorates, it can lead to suboptimal performance, increased wear on internal components, and even system failure if left unchecked. That’s why regularly changing the DPS fluid is not just recommended—it’s essential for prolonging the lifespan of your AWD drivetrain and keeping your vehicle running like new.
When it comes to choosing the right product for this critical maintenance task, not all fluids are created equal. Eneos a global leader in advanced automotive lubricants, offers a superior solution with their Import DPS Fluid. This OE-equivalent formula is specially engineered to meet the precise specifications of Honda and Acura vehicles, ensuring flawless compatibility and long-lasting protection.
In this detailed and easy-to-follow guide, we’ll walk you through the five brilliant steps to safely and effectively change your DPS fluid using ENEOS Import DPS Fluid. Whether you’re a seasoned DIY enthusiast or a first-time vehicle owner looking to take control of your maintenance schedule, this guide will empower you to perform this essential task with confidence.
Let’s dive in and give your AWD system the care it deserves—powered by ENEOS, the trusted name in automotive performance.Maintaining your vehicle’s drivetrain is essential for optimal performance, especially when it comes to the Dual Pump System (DPS) found in many Honda and Acura all-wheel-drive models. Regularly changing the DPS fluid ensures smooth operation and longevity of your vehicle’s drivetrain components. In this comprehensive guide, we’ll walk you through the five brilliant steps to change your DPS fluid using ENEOS Import DPS Fluid.

Step 1: Understand the Importance of DPS Fluid ENEOS

The Dual Pump System (DPS) is a crucial component in Honda and Acura all-wheel-drive vehicles. It transfers torque to the rear wheels when the front wheels slip, enhancing traction and stability. The DPS fluid lubricates the internal components and facilitates the hydraulic operation of the system. Over time, the fluid can degrade, leading to reduced performance and potential damage to the system. Therefore, regular fluid changes are vital.

Step 2: Choose the Right Fluid – ENEOS Import DPS Fluid

Selecting the correct fluid is paramount. ENEOS Import DPS Fluid is the only Original Equipment (OE) replacement fluid available for Honda and Acura vehicles requiring Honda Dual Pump Fluid II and Acura DPSF Genuine Fluid. Formulated with high-quality synthetic base oils and unique additives, ENEOS Import DPS Fluid ensures outstanding compatibility and performance for your vehicle’s DPS system.

Step 3: Gather Necessary Tools and Materials ENEOS

Before beginning the fluid change, ensure you have the following tools and materials:

• ENEOS Import DPS Fluid
• Socket set
• Torque wrench
• Drain pan
• Funnel or fluid transfer pump
• New crush washers (M20 size)

Step 4: Drain the Old DPS Fluid ENEOS

1. Locate the Fill Plug: Begin by opening the fill plug on the rear differential housing using a 3/8″ socket. This step ensures that the system can vent properly during the draining process.
2. Remove the Drain Plug: Next, remove the drain plug to allow the old fluid to fully drain out. It’s advisable to use a drain pan to collect the old fluid and prevent spills.
3. Inspect the Old Fluid: Check the drained fluid for any metal shavings or debris, which could indicate internal wear or damage.

Step 5: Replace Washers and Refill with ENEOS Import DPS Fluid

1. Replace Crush Washers: Install new crush washers on the drain and fill plugs to ensure a proper seal and prevent leaks.
2. Refill with New Fluid: Using a funnel or fluid transfer pump, fill the differential with ENEOS Import DPS Fluid until clean fluid begins to overflow from the fill hole. This indicates that the system is full.
3. Torque the Plugs: Replace the fill and drain plugs, tightening them to the manufacturer’s specified torque. For most models, this is approximately 35 ft-lbs (47 Nm).

Step 6: Final Checks and Road Test ENEOS

After completing the fluid change:

• Check for Leaks: Inspect the drain and fill plugs for any signs of leakage.
• Test Drive: Take your vehicle for a short drive to allow the new fluid to circulate and ensure the system operates smoothly.
• Recheck Fluid Level: After the test drive, recheck the fluid level and top off if necessary.

Conclusion ENEOS

Regularly changing your DPS fluid with ENEOS Import DPS Fluid is essential for maintaining the performance and longevity of your vehicle’s all-wheel-drive system. By following these five brilliant steps, you can ensure optimal operation and avoid potential issues down the road.

Frequently Asked Questions (FAQs) ENEOS

Q1: How often should I change my DPS fluid?

A1: It’s recommended to change your DPS fluid every 30,000 miles to maintain optimal performance.

Q2: Can I use any fluid for my DPS system?

A2: No, it’s crucial to use the correct fluid specified for your vehicle. ENEOS Import DPS Fluid is the OE replacement fluid for Honda and Acura vehicles requiring Honda Dual Pump Fluid II and Acura DPSF Genuine Fluid.

Q3: What are the signs that my DPS fluid needs changing?

A3: Signs include unusual noises from the drivetrain, reduced traction, or the vehicle’s all-wheel-drive system not engaging properly. We cover everything in one place—don’t miss out on the latest insights.